NSN 3110-01-122-1330 · NIIN 011221330 · FSC 3110
NO DASHES 3110011221330
In Stock
CAM FOLLOWER,NEEDLE BEARING
Bearings, Antifriction, Unmounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.3590 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.2030 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7510 |
| AGRJ | STUD DIAMETER | INCHES MINIMUM 0.3105 AND INCHES MAXIMUM 0.3120 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.3390 AND INCHES MAXIMUM 0.3440 |
| AGXF | STUD LENGTH | INCHES NOMINAL 0.8590 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.3125 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | OUTER RACE STEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 |
| MATT | MATERIAL | END PLATE STEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 |
| MATT | MATERIAL | ROLLER STEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 |
| MATT | MATERIAL | STUD STEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 |
| MATT | MATERIAL | SEAL PLASTIC ACETAL OR PLASTIC POLYAMIDE NYLON |
| SFTT | SURFACE TREATMENT | ROLLER CHROMIUM |
| SFTT | SURFACE TREATMENT | OUTER RING CHROMIUM |
| SFTT | SURFACE TREATMENT | EXPOSED SURFACES AS MOUNTED CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | EXPOSED SURFACES AS MOUNTED FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320,CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROLLER FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320,CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HRS3CTR8 | 97613 |
| MS21432-5TEE8 | 96906 |
| MS21432-5TEE8G | 96906 |