NSN 3110-01-126-1681 · NIIN 011261681 · FSC 3110
NO DASHES 3110011261681
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.6230 AND INCHES MAXIMUM 0.6250 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3440 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2497 AND INCHES MAXIMUM 0.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.9280 AND INCHES MAXIMUM 0.9480 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4480 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5930 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 1.8650 AND INCHES MAXIMUM 1.8850 |
| AGXJ | SHANK BORE DIAMETER | INCHES MINIMUM 0.4900 AND INCHES MAXIMUM 0.5100 |
| AGXK | SHANK BORE DEPTH | INCHES MINIMUM 1.0940 AND INCHES MAXIMUM 1.1560 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4130 OR STEEL COMP 8620 |
| MATT | MATERIAL | RETAINER STEEL COMP E52100 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP 4130 OR STEEL COMP 8620 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE OR GLASS FIBER |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-8690 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD 1ST MATERIAL RESPONSE A-S3652 OR ASSN STD 2ND MATERIAL RESPONSE A-S3666 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-8690 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD SINGLE MATERIAL RESPONSE AISI |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALL EXTERNAL/EXPOSED METAL SURFACES FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| REP4H-2FS464 | 21335 |
| REP4H8-5F | 73134 |
| REP4H-2FS464 | 73134 |
| MS21152-5 | 81343 |
| REP4H-2FS464 | 81343 |
| MS21152-5 | 96906 |
| MS21152-5 | 0U583 |
| REP4H-2FS464 | 0U583 |