NSN 3110-01-134-5871 · NIIN 011345871 · FSC 3110
NO DASHES 3110011345871
In Stock
CAM FOLLOWER,NEEDLE BEARING
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.3360 AND INCHES MAXIMUM 0.3760 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.3180 AND INCHES MAXIMUM 1.3810 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AGRJ | STUD DIAMETER | INCHES MINIMUM 0.3105 AND INCHES MAXIMUM 0.3120 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4330 |
| AGXF | STUD LENGTH | INCHES MINIMUM 0.8260 AND INCHES MAXIMUM 0.8730 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| FEAT | SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT; SPHERICAL OD,7.560 IN. R; SLOT IN BOTTOM OF SHANK,0.066 IN. MIN AND 0.072 IN. MAX W X 0.094 IN. MIN AND 0.100 IN. MAX DEPTH; COTTER PIN HOLE IN SHANK |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | ROLLER STEEL COMP 440C |
| MATT | MATERIAL | STUD STEEL COMP 420 |
| MATT | MATERIAL | END PLATE STEEL COMP 420 |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | SEAL PLASTIC POLYAMIDE NYLON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | STUD ASSN STD SINGLE MATERIAL RESPONSE A-S 3651 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | END PLATE ASSN STD SINGLE MATERIAL RESPONSE A-S 3651 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.