NSN 3110-01-157-2331 · NIIN 011572331 · FSC 3110
NO DASHES 3110011572331
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Application: 36E153-4A STARTER ENG
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.5068 AND INCHES MAXIMUM 0.5118 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.5903 AND INCHES MAXIMUM 0.5906 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 1.6530 AND INCHES MAXIMUM 1.6535 |
| AGAV | END ITEM IDENTIFICATION | 36E153-4A STARTER ENG |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0001 AND INCHES MAXIMUM RADIAL 0.0007 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| FEAT | SPECIAL FEATURES | OUTER RING LOCK GROOVE 0.0780 IN. NOM FROM OUTER EDGE,0.0560 IN. NOM WIDE AND 0.0933 IN. NOM DEEP FOR INCORPORATION OF A SNAP RING,NOT INCLUDED |
| LBMA | LUBRICATION MATERIAL | OIL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-7808 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | SEPARATOR COPPER ALLOY 623 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| STYL | STYLE DESIGNATOR |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2498657 | 3H889 |
| 302SG | 38443 |
| 43302 | 43334 |
| 2498657 | 59211 |
| 2498657 | 6T459 |
| R302T11C8K812A5 | 83086 |
| R-302SD600M1A5P812L01 | 83086 |
| R303T11C8K812A5 | 83086 |
| 2498657 | 92003 |
| 2495675 | 99551 |
| 2498657 | 99551 |