NSN 3110-01-180-4822 · NIIN 011804822 · FSC 3110
NO DASHES 3110011804822
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.1406 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.0937 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 0.3590 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.0310 |
| AGVV | OUTER RING OUTSIDE DIAMETER | INCHES NOMINAL 0.3125 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0001 AND INCHES MAXIMUM RADIAL 0.0008 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| FEAT | SPECIAL FEATURES | 25 PCT FULL OF SPECIFIED LUBRICANT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE VERSILUBE G-300,FSC- 01139 |
| MATT | MATERIAL | RETAINER STEEL COMP 416SE OR STEEL COMP 440A OR STEEL COMP 430F OR STEEL COMP 440C OR STEEL COMP 431 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 440B OR STEEL COMP 416 OR STEEL COMP 430 OR STEEL COMP 440F OR STEEL COMP 420 OR STEEL COMP 420F OR STEEL COMP 416 PLUS X OR STEEL COMP 420FSE OR STEEL COMP 430FSE OR STEEL COMP 440FSE OR STEEL COMP 403 OR STEEL COMP 414 OR STEEL COMP 446 |
| MATT | MATERIAL | SHIELD STEEL COMP 348 OR STEEL COMP 301 OR STEEL COMP 303PB OR STEEL COMP 303MA OR STEEL COMP 303 PLUS X OR STEEL COMP 321 OR STEEL COMP 302B OR STEEL COMP 310S OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 303CU OR STEEL COMP 309S OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 304 OR STEEL COMP 384 OR STEEL COMP 314 OR STEEL COMP 347 OR STEEL COMP 303 OR STEEL COMP 302 OR STEEL COMP 305 OR STEEL COMP 317 OR STEEL COMP 303SE OR STEEL COMP 304L OR STEEL COMP 385 |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD ALL MATERIAL RESPONSES SAE J405 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD ALL MATERIAL RESPONSES SAE J405 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHIELD ASSN STD ALL MATERIAL RESPONSES SAE J405 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD ALL MATERIAL RESPONSES SAE J405 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD ALL MATERIAL RESPONSES SAE J405 |
| STYL | STYLE DESIGNATOR |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S326-4 | 40920 |
| S326 | 40920 |
| S5FCHH3 | 40920 |
| S5FCHH5 | 40920 |
| SSR1F-5ZZA3 | 50294 |
| SSRIF-5ZZHA3P18LY15 | 50294 |
| S326 | 50294 |
| S326-4 | 50294 |
| SFR1-53PPK18/36 | 83086 |
| S326-4 | 12511 |