NSN 3110-01-180-4825 · NIIN 011804825 · FSC 3110
NO DASHES 3110011804825
In Stock
BEARING,ROLLER,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.0700 |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.4370 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.7400 AND INCHES MAXIMUM 1.7950 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.7500 AND INCHES MAXIMUM 0.8100 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.3350 AND INCHES MAXIMUM 0.3500 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.3700 AND INCHES MAXIMUM 0.3750 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 1.3650 AND INCHES MAXIMUM 1.3950 |
| AGYJ | SEAL QUANTITY | 1 |
| AGYK | SHIELD QUANTITY | 1 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0002 AND INCHES MAXIMUM RADIAL 0.0010 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.4370 |
| CBBL | FEATURES PROVIDED | FLUSH LUBRICATION FITTING |
| CDWB | DISTANCE FROM HOLE CENTER TO END | INCHES NOMINAL 0.3750 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES MINIMUM 4.00 |
| FEAT | SPECIAL FEATURES | SECOND FLUSH LUBRICATION FITTING OPTIONAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | ROLLER STEEL COMP E52100 |
| MATT | MATERIAL | SHIELD STEEL COMP 430 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7493 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHIELD FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SF4-4A1-501 | 77896 |
| 47740-6 | 77896 |