NSN 3110-01-186-5522 · NIIN 011865522 · FSC 3110
NO DASHES 3110011865522
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.8350 AND INCHES MAXIMUM 0.8450 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 8.9993 AND INCHES MAXIMUM 9.0000 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 9.7493 AND INCHES MAXIMUM 9.7500 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | LIPS TURNED INWARDLY |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 720.0 AND POUNDS MAXIMUM 880.0 |
| CTHY | CONTACT ANGLE | DEGREES NOMINAL 30.0 |
| FEAT | SPECIAL FEATURES | PASSIVATE,QQ-P-35,RINGS AND BALLS; 20 DROPS OF SPECIFIED LUBRICANT FROMNO. 26 HYPODERMIC NEEDLE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-6085 |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MATT | MATERIAL | RETAINER PLASTIC PHENOLIC |
| MATT | MATERIAL | LUBRICATION OIL |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | SEAL RUBBER CHLOROPRENE CLASS CR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MIL SPEC SINGLE MATERIAL RESPONSE -IL--79,FOR- T,TYE FBE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL MIL SPEC SINGLE MATERIAL RESPONSE -IL-R-6855,CLASS 2,TYE A |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 58260-13084019 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.