NSN 3110-01-187-1939 · NIIN 011871939 · FSC 3110
NO DASHES 3110011871939
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.4800 AND INCHES MAXIMUM 0.5000 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.9997 AND INCHES MAXIMUM 2.0000 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 2.4997 AND INCHES MAXIMUM 2.5000 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTHQ | BEARING PRELOAD RATING | POUNDS NOMINAL 30.0 |
| CTHY | CONTACT ANGLE | DEGREES NOMINAL 30.0 |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-81846 |
| MATT | MATERIAL | INNER RACE STEEL CORROSION RESISTING |
| MATT | MATERIAL | OUTER RACE STEEL CORROSION RESISTING |
| MATT | MATERIAL | LUBRICATION OIL |
| MATT | MATERIAL | BALL STEEL CORROSION RESISTING |
| MATT | MATERIAL | SEPARATOR PLASTIC PHENOLIC |
| STYL | STYLE DESIGNATOR |