NSN 3110-01-189-7567 · NIIN 011897567 · FSC 3110
NO DASHES 3110011897567
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.3750 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7660 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1897 AND INCHES MAXIMUM 0.1900 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.7710 AND INCHES MAXIMUM 0.7910 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.7190 AND INCHES MAXIMUM 0.7810 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.3180 AND INCHES MAXIMUM 0.3380 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.4320 AND INCHES MAXIMUM 0.4370 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 1.3650 AND INCHES MAXIMUM 1.3850 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0000 AND INCHES MAXIMUM RADIAL 0.0004 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | KEYWAY IN SHANK |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | OUTER RING STEEL COMP 4720 OR STEEL COMP 8620 OR STEEL COMP 4130 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE OR GLASS FIBER |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4720 OR STEEL COMP 8620 OR STEEL COMP 4130 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY ASSN STD 1ST MATERIAL RESPONSE AISI OR ASSN STD 2ND MATERIAL RESPONSE AISI OR ASSN STD 3RD MATERIAL RESPONSE AISI OR ASSN STD 3RD MATERIAL RESPONSE AST- A322 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD 1ST MATERIAL RESPONSE AISI OR ASSN STD 2ND MATERIAL RESPONSE AISI OR ASSN STD 3RD MATERIAL RESPONSE AISI OR ASSN STD 3RD MATERIAL RESPONSE AST- A322 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD 1ST MATERIAL RESPONSE A-S3652 |
| SFTT | SURFACE TREATMENT | EXPOSED SURFACES AS MOUNTED CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | EXPOSED SURFACES AS MOUNTED FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.