NSN 3110-01-212-6196 · NIIN 012126196 · FSC 3110
NO DASHES 3110012126196
In Stock
PLATE,RETAINING,BEARING
Bearings, Antifriction, Unmounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 9.375 |
| ABMB | MINOR THICKNESS | INCHES NOMINAL 0.500 |
| ABVL | APERTURE DIAMETER | INCHES MINIMUM 3.7495 AND INCHES MAXIMUM 3.7525 |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | INCHES NOMINAL 7.0632 |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | INCHES NOMINAL 4.9508 |
| ADUM | OVERALL THICKNESS | INCHES NOMINAL 2.500 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 7.750 |
| BXCZ | FIRST COUNTERBORE DIAMETER | INCHES NOMINAL 5.000 |
| BZLN | SECOND COUNTERBORE DIAMETER | INCHES MINIMUM 5.5118 AND INCHES MAXIMUM 5.5128 |
| CCFJ | SECOND COUNTERBORE DEPTH | INCHES NOMINAL 1.3125 |
| CFNT | FIRST COUNTERBORE DEPTH | INCHES NOMINAL 0.6875 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CWHW | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | INCHES NOMINAL 3.5316 |
| CWJN | DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | INCHES NOMINAL 2.4754 |
| CWJW | MOUNTING HOLE TYPE | ROUND, THREADED |
| FEAT | SPECIAL FEATURES | OD FLAT 3.875 IN. ABOVE AND BELOW HORIZ CENTERLINE; 6 ROUND UNTHREADED HOLES 0.4375 IN. DIA ON 8.625 BOLT CIRCLE; 30.0 DEG TAPER ON FRONTFACE TO 5.125 IN. DIA; KEYWAY SLOT IN BORE 2.000 IN. WIDE,3.500 IN R FROM BORE CENTER,2.000 IN. DEEP; CIRCUMFERENTIAL GROOVE IN OD,0.875 IN. FROM BACKFACE TO CORNER,0.375 IN. WIDE,7.035 PORM 0.010 IN. DIA |
| MATT | MATERIAL | OVERALL IRON CAST UNS F33101 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-I-24137 CLASS A |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2R-727 PIECE 20 | 51729 |
| 2R-727 | 51729 |
| 839-119-042 | 51729 |
| 860-950-044 PIECE 20 | 51729 |
| 13921 | 51729 |
Supersedes
This item replaces cancelled NIIN 012099641. An older drawing citing one of those numbers resolves here.