NSN 3110-01-217-2327 · NIIN 012172327 · FSC 3110
NO DASHES 3110012172327
In Stock
BEARING,ROLLER,NEEDLE
Bearings, Antifriction, Unmounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.6250 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 1.6250 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 1.4400 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 1.5000 |
| AGYE | SURFACE FINISH | UNGROUND |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS |
| FEAT | SPECIAL FEATURES | OIL HOLES AND OIL GROOVE IN INNER RING,NO OIL HOLES OR OIL GROOVE IN OUTER RING |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE DC510,DOW CORNING COR |
| MATT | MATERIAL | ROLLER STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | END PLATE STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| MATT | MATERIAL | SEAL PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND PLASTIC ACETAL AND PLASTIC POLYESTER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7493 AND -IL-S-8690 AND FED STD 2ND MATERIAL RESPONSE 66,E50100,E51100 AND E52100 AND FED SPEC 3RD MATERIAL RESPONSE QQ-S-700 AND ASSN STD 4TH MATERIAL RESPONSE AST- A304,A322 AND A331 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7493 AND -IL-S-8690 AND FED STD 2ND MATERIAL RESPONSE 66,E50100,E51100 AND E52100 AND FED SPEC 3RD MATERIAL RESPONSE QQ-S-700 AND ASSN STD 4TH MATERIAL RESPONSE AST- A304,A322 AND A331 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL MIL SPEC 1ST MATERIAL RESPONSE L--410 AND MIL SPEC 2ND MATERIAL RESPONSE L--392 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | END PLATE MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7493 AND -IL-S-8690 AND FED STD 2ND MATERIAL RESPONSE 66,E50100,E51100 AND E52100 AND FED SPEC 3RD MATERIAL RESPONSE QQ-S-700 AND ASSN STD 4TH MATERIAL RESPONSE AST- A304,A322 AND A331 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7493 AND -IL-S-8690 AND FED STD 2ND MATERIAL RESPONSE 66,E50100,E51100 AND E52100 AND FED SPEC 3RD MATERIAL RESPONSE QQ-S-700 AND ASSN STD 4TH MATERIAL RESPONSE AST- A304,A322 AND A331 |
| SFTT | SURFACE TREATMENT | OUTER RING CHROMIUM |
| SFTT | SURFACE TREATMENT | END PLATE CADMIUM |
| SFTT | SURFACE TREATMENT | INNER RING CADMIUM OR OXIDE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC 1ST TREATMENT RESPONSE QQ--416,CL 2 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-13924 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | END PLATE FED SPEC SINGLE TREATMENT RESPONSE QQ--416,CL 2 |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS21439 | 81343 |
| MS21439-110 | 81343 |
| MS21439-110 | 96906 |
| AS21439 | 0U583 |
| MS21439-110 | 0U583 |