NSN 3110-01-222-9165 · NIIN 012229165 · FSC 3110
NO DASHES 3110012229165
In Stock
BEARING,ROLLER,AIRFRAME
Bearings, Antifriction, Unmounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 1.9995 AND INCHES MAXIMUM 2.0000 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.9950 AND INCHES MAXIMUM 1.0000 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 1.4950 AND INCHES MAXIMUM 1.5000 |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0004 AND INCHES MAXIMUM RADIAL 0.00012 |
| CBBL | FEATURES PROVIDED | LUBRICATION GROOVE AND LUBRICATION HOLE |
| FEAT | SPECIAL FEATURES | 10 DEG SELF ALIGNMENT IN EITHER DIRECTION |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER STEEL COMP 4140 OR COPPER ALLOY |
| MATT | MATERIAL | SEAL GLASS FIBER OR RUBBER SYNTHETIC |
| MATT | MATERIAL | ROLLER STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR FED SPEC 2ND MATERIAL RESPONSE QQ-C-390 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| SFTT | SURFACE TREATMENT | ALL EXTERNAL/EXPOSED METAL SURFACES CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALL EXTERNAL/EXPOSED METAL SURFACES FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS28914 | 81343 |
| MS28914-8C | 81343 |
| MS28914-8C | 96906 |
| MS28914-8C | 0U583 |
| AS28914 | 0U583 |