NSN 3110-01-246-1850 · NIIN 012461850 · FSC 3110
NO DASHES 3110012461850
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.3750 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.5160 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1897 AND INCHES MAXIMUM 0.1900 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.9590 AND INCHES MAXIMUM 0.9790 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.2810 AND INCHES MAXIMUM 1.3430 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.3970 AND INCHES MAXIMUM 0.4170 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.4950 AND INCHES MAXIMUM 0.5000 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES MINIMUM 2.0210 AND INCHES MAXIMUM 2.0410 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | 80 PCT FULL SPECIFIED LUBRICANT |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER STEEL COMP 301 OR STEEL COMP 302 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE OR GLASS FIBER OR PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4720H OR STEEL COMP 8620H OR STEEL COMP 348 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5059 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5515 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6440 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY ASSN STD 1ST MATERIAL RESPONSE AST- A304 OR ASSN STD 2ND MATERIAL RESPONSE AST- A304 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6440 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD 2ND MATERIAL RESPONSE A-S 3652 |
| SFTT | SURFACE TREATMENT | EXPOSED SURFACES AS MOUNTED CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | EXPOSED SURFACES AS MOUNTED FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 81205-BACB10AD |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| REP3MLS6AFS428 | 21335 |
| REP3MLS6A-FS464 | 21335 |
| ABRL3M-101 | 50294 |
| REP3MLS6AFS428 | 73134 |
| BACB10AD4LK | 81205 |
| ABRL3M-101 | J1011 |
| ABRL3M-101 | S0352 |
| ABRL3M-101 | 15860 |
Supersedes
This item replaces cancelled NIIN 012840814. An older drawing citing one of those numbers resolves here.