NSN 3110-01-255-5040 · NIIN 012555040 · FSC 3110
NO DASHES 3110012555040
In Stock
BEARING,ROLLER,NEEDLE
Bearings, Antifriction, Unmounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.3125 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 1.0000 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.6250 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 0.6875 |
| AGWG | CROWN RADIUS | INCHES NOMINAL 12.0000 |
| AGYE | SURFACE FINISH | GROUND |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| CBBL | FEATURES PROVIDED | LUBRICATION GROOVE AND LUBRICATION HOLE |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS |
| FEAT | SPECIAL FEATURES | OIL GROOVE IN OUTER RING OPTIONAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-81322 |
| MATT | MATERIAL | END PLATE STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 |
| MATT | MATERIAL | SEAL PLASTIC ACETAL OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| MATT | MATERIAL | INNER RING STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 |
| MATT | MATERIAL | ROLLER STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 |
| SFTT | SURFACE TREATMENT | END PLATE EXPOSED SURFACES CADMIUM |
| SFTT | SURFACE TREATMENT | OUTER RING CHROMIUM |
| SFTT | SURFACE TREATMENT | INNER RING CADMIUM OR OXIDE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320,CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | END PLATE EXPOSED SURFACES FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC 1ST TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-13924 |
| STYL | STYLE DESIGNATOR |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS39901 | 81343 |
| AS21442 | 81343 |
| MS21442-161 | 81343 |
| MS21442-161 | 96906 |
| AS21442 | 0U583 |
| AS39901 | 0U583 |
| MS21442-161 | 0U583 |