NSN 3110-01-266-8410 · NIIN 012668410 · FSC 3110
NO DASHES 3110012668410
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.3020 AND INCHES MAXIMUM 0.3120 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.4997 AND INCHES MAXIMUM 1.5000 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 1.7496 AND INCHES MAXIMUM 1.7500 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 5T |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 5.0 AND POUNDS MAXIMUM 20.0 |
| CTHY | CONTACT ANGLE | DEGREES MAXIMUM 19.0 |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE RHEOLUBE 951,CAGEC 82577 |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | LUBRICATION GREASE |
| MATT | MATERIAL | RETAINER PLASTIC PHENOLIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| STYL | STYLE DESIGNATOR |