NSN 3110-01-309-7133 · NIIN 013097133 · FSC 3110
NO DASHES 3110013097133
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.6850 AND INCHES MAXIMUM 0.6890 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.4998 AND INCHES MAXIMUM 0.5000 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.7498 AND INCHES MAXIMUM 0.7500 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MOLDED |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 2.0 AND POUNDS MAXIMUM 5.0 |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-6085 |
| MATT | MATERIAL | LUBRICATION OIL |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MATT | MATERIAL | SPACER STEEL COMP 440C |
| MATT | MATERIAL | CAGE COTTON AND PLASTIC PHENOLIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CAGE MIL SPEC SINGLE MATERIAL RESPONSE -IL--79,TYE FBE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE AISI 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE AISI 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPACER ASSN STD SINGLE MATERIAL RESPONSE AISI 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE AISI 440C |
| SFTT | SURFACE TREATMENT | INNER RING PASSIVATE |
| SFTT | SURFACE TREATMENT | OUTER RING PASSIVATE |
| SFTT | SURFACE TREATMENT | BALL PASSIVATE |
| SFTT | SURFACE TREATMENT | SPACER PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SPACER FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AMV32W148CRVDBAXXXX | 21335 |
| AMV32W148CRVDBW/SP | 21335 |
| 901805-1C | 82577 |
| 4553 | 83086 |