NSN 3110-01-318-2095 · NIIN 013182095 · FSC 3110
NO DASHES 3110013182095
In Stock
PLATE,RETAINING,BEARING
Bearings, Antifriction, Unmounted
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRY | LENGTH | INCHES NOMINAL 4.000 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.531 |
| ABVL | APERTURE DIAMETER | INCHES NOMINAL 1.375 |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | INCHES NOMINAL 3.125 |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | INCHES NOMINAL 3.125 |
| ADUM | OVERALL THICKNESS | INCHES NOMINAL 1.625 |
| CKSR | RAISED SURFACE HEIGHT | INCHES NOMINAL 0.750 |
| CWGF | COUNTERBORE DIAMETER | INCHES MINIMUM 1.750 AND INCHES MAXIMUM 1.751 |
| CWHW | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | INCHES NOMINAL 1.562 |
| CWHX | COUNTERBORE DEPTH | INCHES MINIMUM 1.975 AND INCHES MAXIMUM 1.980 |
| CWJN | DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | INCHES NOMINAL 1.562 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| CWLK | OUTSIDE RAISED SURFACE DIAMETER | INCHES MINIMUM 2.748 AND INCHES MAXIMUM 2.749 |
| CWTF | FLANGE THICKNESS | INCHES NOMINAL 0.375 |
| MATT | MATERIAL | OVERALL STEEL COMP 1020 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AST- A108 OR ASSN STD SINGLE MATERIAL RESPONSE AST- A575 OR ASSN STD SINGLE MATERIAL RESPONSE AST- A576 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE MANGANESE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE DOD--16232 |
| STYL | STYLE DESIGNATOR |