NSN 3110-01-333-2885 · NIIN 013332885 · FSC 3110
NO DASHES 3110013332885
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.7100 AND INCHES MAXIMUM 0.7500 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 11.9994 AND INCHES MAXIMUM 12.0000 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 12.7494 AND INCHES MAXIMUM 12.7500 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 475.0 AND POUNDS MAXIMUM 525.0 |
| CTHY | CONTACT ANGLE | DEGREES NOMINAL 30.0 |
| FEAT | SPECIAL FEATURES | EACH BEARING SHALL BE LUBRICATED WITH 9 DROPS MIN,11 DROPS MAX OF SPECIFIED LUBE EVENLY DISTRIBUTED AROUND CIRCUMFERENCE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE 717806000,CAGEC 04939 |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MATT | MATERIAL | RETAINER PLASTIC POLYAMIDE NYLON |
| MATT | MATERIAL | LUBRICATION OIL |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MIL SPEC SINGLE MATERIAL RESPONSE -IL-R-46198,TYE 1 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| SFTT | SURFACE TREATMENT | BALL PASSIVATE |
| SFTT | SURFACE TREATMENT | OUTER RING PASSIVATE |
| SFTT | SURFACE TREATMENT | INNER RING PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE TREATMENT RESPONSE AST- A380 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE TREATMENT RESPONSE AST- A380 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE TREATMENT RESPONSE AST- A380 |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 717801762-003 | 32828 |
| 717801762-003 | 04939 |
| 717801762-003 | 06144 |
| 17581 | 06144 |
Supersedes
This item replaces cancelled NIIN 012872972. An older drawing citing one of those numbers resolves here.