NSN 3110-01-338-2755 · NIIN 013382755 · FSC 3110
NO DASHES 3110013382755
In Stock
BEARING,ROLLER,NEEDLE
Bearings, Antifriction, Unmounted
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.5000 |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 1.1900 |
| AGVU | INNER RING WIDTH | INCHES NOMINAL 1.2500 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| FEAT | SPECIAL FEATURES | OIL HOLES AND OIL GROOVE IN INNER RING,NO OIL HOLES OR OIL GROOVE IN OUTER RING;LUBRICATING SPEC FOR LUBRICATING MATERIAL:MIL-G-81322;BEARING NEEDLE STYLE:NO. 432 IN OLD FIIG A04400;ROLLER OD;1.3550 IN. NOM.;AFBMA STANDARD TOLERANCE DESIGNATION:AFBMA STANDARD TOLERANCE FOR AIRPLANE NEEDLE BEARINGS;ROLLER ELEMENT GROOVE QTY:2;RING ALIGNING:NOT INCLUDED;OTHER MATERIAL FOR END PLATES ARE STEEL,QQ-S-700 OR STEEL,ASTM A304,A322 AND A331;OTHER MATERIAL FOR INNER RINGS,OUTER RINGS AND ROLLERS ARE THE SAME AS THE END PLATES;OTHER MATERIAL FOR THE SEALS ARE:PLASTIC,POLYAMIDE,L-P-410,TYPE 6/6,OR PLASTIC,ACETAL RESIN,L-P-392,OR PLASTIC,POLYESTER ELASTOMER |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | INNER RING STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E52100 OR STEEL COMP E51100 |
| MATT | MATERIAL | OUTER RING STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E52100 OR STEEL COMP E51100 |
| MATT | MATERIAL | ROLLER STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E52100 OR STEEL COMP E51100 |
| MATT | MATERIAL | END PLATE STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E52100 OR STEEL COMP E51100 |
| SFTT | SURFACE TREATMENT | END PLATE CADMIUM |
| SFTT | SURFACE TREATMENT | OUTER RING CHROMIUM |
| SFTT | SURFACE TREATMENT | INNER RING CADMIUM OR OXIDE |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21439-108 | 81343 |
| AS39901 | 81343 |
| AS21439 | 81343 |
| 8AL2022 | 92563 |
| MS21439-108 | 96906 |
| AS21439 | 0U583 |
| MS21439-108 | 0U583 |
| AS39901 | 0U583 |