NSN 3110-01-341-5689 · NIIN 013415689 · FSC 3110
NO DASHES 3110013415689
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.3750 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.9690 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.9280 AND INCHES MAXIMUM 0.9480 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 0.6250 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.4280 AND INCHES MAXIMUM 0.4480 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5930 |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 1.5000 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.3750 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| FEAT | SPECIAL FEATURES | MADE FROM MS21151-8G; SHANK END CHAMFERED; STRAIGHT KNURL OVER THREADS AT NECK |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP 4130 OR STEEL COMP 8620 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE AND STEEL COMP 301 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL ASSN STD 1ST MATERIAL RESPONSE A-S 3625 OR ASSN STD 1ST MATERIAL RESPONSE A-S 3666 OR ASSN STD 2ND MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 AND ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 AND ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-8690 OR ASSN STD ALL MATERIAL RESPONSES AISI |
| SFTT | SURFACE TREATMENT | EXPOSED SURFACES AS MOUNTED CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | EXPOSED SURFACES AS MOUNTED FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6802-3 | 34742 |