NSN 3110-01-530-7030 · NIIN 015307030 · FSC 3110
NO DASHES 3110015307030
In Stock
BEARING,ROLLER,SELF-ALIGNING
Bearings, Antifriction, Unmounted
Application: B-757 AIRCRAFT
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROLLER ASSN STD SINGLE MATERIAL RESPONSE A-S6440 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHIELD ASSN STD SINGLE MATERIAL RESPONSE AST-A240 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY ASSN STD SINGLE MATERIAL RESPONSE A-S6265 |
| FEAT | SPECIAL FEATURES | INNER RACE AND ROLLER HEAT TREATED TO 60-65 ROCKWELL C HARDNESS; RETAINER WITHSTAND 20000.0 POUNDS PER SQUARE INCH MINIMUM; SLEEVE 15-5PH STAINLESS STEEL 32-38 ROCKWELL C HARDNESS; COLLAR MATERIAL 4142H MODIFIED PER AMS6378 31-40 ROCKWELL C HARDNESS; SEAL CARBONBLACK COLOR; ROD END SHANK EXTERNALLY THREADED 0.8750-14 UNJF - 3A CLASS; SHANK LENGTH 2.9200 TO 2.9800 INCHES; ALEMITE GREASE FITTING P/N 1728-8; LUBRICATION HOLE 0.188 INCH DIAMETER; RADIAL LIMIT LOAD RATING 26600.0 POUNDS, THRUST 12900 POUNDS; OPERATING TEMPERATURE MINUS 65.0 TO PLUS 250.0 DEGREES F. |
| CBBL | FEATURES PROVIDED | EXTERNAL LUBRICATION FITTING AND LUBRICATION HOLE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING, ROD END, ROLLING ELEMENT, SELF - ALIGNING |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| MATT | MATERIAL | SHIELD STEEL COMP 430 |
| MATT | MATERIAL | SLEEVE STEEL CORROSION RESISTING |
| AGZD | BORE SHAPE | STRAIGHT |
| MATT | MATERIAL | RETAINER COPPER ALLOY |
| MATT | MATERIAL | ROD END BODY STEEL COMP E9310 |
| MATT | MATERIAL | ROLLER STEEL COMP E52100 |
| MATT | MATERIAL | SEAL RUBBER POLYESTER URETHANE CLASS AU |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 1.2100 AND INCHES MAXIMUM 1.2150 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SLEEVE ASSN STD SINGLE MATERIAL RESPONSE A-S5659 |
| AGAV | END ITEM IDENTIFICATION | B-757 AIRCRAFT |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.9950 AND INCHES MAXIMUM 1.0100 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 2.1850 AND INCHES MAXIMUM 2.2350 |
| AKVV | INTERNAL CLEARANCE | INCHES NOMINAL RADIAL 0.0003 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE TREATMENT RESPONSE A-S-QQ--416, TYE 1, CLASS 2 OR ASSN STD SINGLE TREATMENT RESPONSE A-S2417 |
| SFTT | SURFACE TREATMENT | OUTER RING CADMIUM OR ZINC OR NICKEL |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| DRX34C | 77896 |
| 10106-624 | 77896 |
| S251N214-8 | 81205 |