NSN 3110-00-684-1165 · NIIN 006841165 · FSC 3110
NO DASHES 3110006841165
In Stock
BEARING,BALL,ROD END
Bearings, Antifriction, Unmounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP 8620 |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | INCHES NOMINAL 0.5000 |
| AAZF | SHANK STYLE | |
| SFTT | SURFACE TREATMENT | EXPOSED SURFACES AS MOUNTED CADMIUM |
| STYL | STYLE DESIGNATOR | |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | INCHES NOMINAL 1.4690 |
| AGXJ | SHANK BORE DIAMETER | INCHES NOMINAL 0.4380 |
| AGXK | SHANK BORE DEPTH | INCHES NOMINAL 0.7500 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5930 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE AISI 8620 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.3125 |
| CTLK | SELF-ALIGNMENT ANGLE | DEGREES NOMINAL 10.00 |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-3278 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.9380 |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.9380 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2497 AND INCHES MAXIMUM 0.2500 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AGVT | OUTER RING WIDTH | INCHES NOMINAL 0.4380 |
Supersedes
This item replaces cancelled NIIN 006519487. An older drawing citing one of those numbers resolves here.