NSN 3120-00-011-0891 · NIIN 000110891 · FSC 3120
NO DASHES 3120000110891
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| MATT | MATERIAL | OVERALL ALUMINUM OR COPPER ALLOY 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-679 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.5640 AND INCHES MAXIMUM 0.5680 |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER CHAMFERED |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0940 AND INCHES MAXIMUM 0.0960 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| FEAT | SPECIAL FEATURES | FLANGE END OF BODY COUNTERBORED,0.877 IN. MIN,0.881 IN. MAX DIA,0.050 IN. MIN,0.056 IN. MAX DEEP,PLAIN END OF BODY COUNTERBORED TO 0.801 IN. MIN,0.803 IN. MAX DIA,0.183 IN. MIN,0.188 IN. MAX DEEP,GROOVED OUTER PERIPHERY OF BODY,0.3020 IN. MIN,0.3115 IN. MAX FROM PLAIN END TO CENTER OF GROOVE,DIM.,0.141 IN. MIN,0.146 IN. MAX W,0.08850 IN. MIN,0.08975 IN. MAX DEEP |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 8.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 32.0 |
| STYL | STYLE DESIGNATOR | |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.9230 AND INCHES MAXIMUM 0.9235 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.6260 AND INCHES MAXIMUM 0.6265 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 1.0870 AND INCHES MAXIMUM 1.0930 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 114H5614-1 | 1G8N9 |
| 114H5614-1 | 1HP47 |
| 114H5614-1 | 33682 |
| 114H5614-1 | 3L665 |
| 114H5614-1 | 77272 |
| 114H5614-1 | 7V381 |
| 114H5614-1 | 81205 |
| 114H5614-1 | 9N156 |
| 114H5614-1 | 0H314 |