NSN 3120-00-061-9526 · NIIN 000619526 · FSC 3120
NO DASHES 3120000619526
In Stock
BEARING HALF,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF LEFT FLANGE MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF RIGHT FLANGE MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF RIGHT FLANGE MICROINCHES 63.0 |
| BZLX | CORNER SHAPE | RIGHT FLANGE BODY CORNER SQUARE |
| BZLX | CORNER SHAPE | RIGHT FLANGE OUTSIDE LEFT CORNER SQUARE |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 16.0 |
| MATT | MATERIAL | OUTER LAYER STEEL |
| STYL | STYLE DESIGNATOR | |
| AGFT | RIGHT FLANGE WIDTH | INCHES MINIMUM 0.3090 AND INCHES MAXIMUM 0.3100 |
| CTJM | ANTIROTATION/LUBRICATION TYPE AND QUANTITY | HOLE 4 |
| CTLF | HOLE SPACING ANGLE | DEGREES NOMINAL 10.0 |
| CTMQ | SURFACE GROOVE LOCATION AND QUANTITY | INTERNAL 1 |
| MATT | MATERIAL | INNER LAYER COPPER ALLOY |
| MATT | MATERIAL | LUBRICATION OIL LUBRICATING |
| AGKD | DISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING | FIRST INCHES NOMINAL 2.0625 |
| AGKH | LUBRICANT ACCOMMODATION STYLE | |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| AAUB | HOLE DIAMETER | FIRST INCHES NOMINAL 0.3125 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.7480 AND INCHES MAXIMUM 4.7500 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 8.0005 AND INCHES MAXIMUM 8.0010 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 7.1960 AND INCHES MAXIMUM 7.1980 |
| AGFQ | LEFT FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 8.4950 AND INCHES MAXIMUM 8.5050 |
| AGFR | RIGHT FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 8.4950 AND INCHES MAXIMUM 8.5050 |
| AGFS | LEFT FLANGE WIDTH | INCHES MINIMUM 0.3090 AND INCHES MAXIMUM 0.3100 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY AND FLANGE MICROINCHES 63.0 |