NSN 3120-00-132-4983 · NIIN 001324983 · FSC 3120
NO DASHES 3120001324983
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.2680 AND INCHES MAXIMUM 1.3110 |
| AAZF | SHANK STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.1895 AND INCHES MAXIMUM 0.1915 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.5420 AND INCHES MAXIMUM 0.5620 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 0.9700 AND INCHES MAXIMUM 1.0300 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.1770 AND INCHES MAXIMUM 0.1970 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.2450 AND INCHES MAXIMUM 0.2500 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.5900 AND INCHES MAXIMUM 0.6000 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 2890 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C NOMINAL 59.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C NOMINAL 34.0 |
| FEAT | SPECIAL FEATURES | LUBRICATION GROOVE FORMED BY TWO PIECE RACE INSERT |
| MATT | MATERIAL | INNER MEMBER STEEL |
| MATT | MATERIAL | LUBRICATION OIL LUBRICATING |
| MATT | MATERIAL | RACE INSERT COPPER ALLOY |
| MATT | MATERIAL | ROD END BODY STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LUBRICATION ASSN STD SINGLE MATERIAL RESPONSE SAE 40 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT FED SPEC SINGLE MATERIAL RESPONSE QQ-C-465 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6728 |
| SFTT | SURFACE TREATMENT | INNER MEMBER CHROMIUM |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER MEMBER FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CL 3 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CL 3 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6866 AND SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349- -IL-I-6868 |
| AAJD | THREAD CLASS | 3A |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| REM6AZN8 | 21335 |
| 206-001-054-1 | 21335 |
| REM6AZN8 | 3NPS1 |
| 206-001-054-1 | 3NPS1 |
| HMX3B | 73134 |
| 206-001-054-1 | 73134 |
| 206-001-054 | 97499 |
| 206-001-054-1 | 97499 |
| REMX3-2D | 99528 |
| 206-001-054-1 | 99528 |
| 51191 | 09455 |
| 206-001-054-1 | 09455 |
| 3E35 | 15860 |
| 206-001-054-1 | 15860 |
| ARB3E35 | 15860 |