NSN 3120-00-230-1976 · NIIN 002301976 · FSC 3120
NO DASHES 3120002301976
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0620 |
| STYL | STYLE DESIGNATOR | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RIGHT END SURFACE OF BODY MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RIGHT END SURFACE OF LEFT FLANGE MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTSIDE DIAMETER SURFACE OF FLANGE MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF LEFT FLANGE ANODIZE OR CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTSIDE DIAMETER SURFACE OF BODY MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.3020 AND INCHES MAXIMUM 0.3170 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.6260 AND INCHES MAXIMUM 0.6265 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.5000 AND INCHES MAXIMUM 0.5010 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.7400 AND INCHES MAXIMUM 0.7600 |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF BODY ANODIZE OR CHROMATE |
| MATT | MATERIAL | OUTER LAYER ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER FED STD SINGLE MATERIAL RESPONSE QQ-A-200 TO 3,ALLOY 2024,T4 |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF BODY ANODIZE OR CHROMATE |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF FLANGE ANODIZE OR CHROMATE |
| FEAT | SPECIAL FEATURES | PLASTIC POLYTETRAFLUOROETHYLENE /LINER BONDED TO LEFT END SURFACE OF BODY AND FLANGE |
| MATT | MATERIAL | INNER LAYER PLASTIC POLYTETRAFLUOROETHYLENE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
Cross-references
17 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FBJW16TH025W | 21335 |
| FBJW16TH025W | 3NPS1 |
| C7505A8-025 | 50294 |
| AFGDA8-025 | 50294 |
| GDFRDD8-025 | 73134 |
| C7505A8-025 | 81755 |
| C7505A8-025 | 81376 |
| SWBAF-8-050-025 | 81376 |
| C4545DD8-025 | 81755 |
| KDJ08A025-59 | 97613 |
| C7505A8-025 | 97613 |
| 07-382-8E | 09455 |
| 90982-08-025 | 09455 |
| C7505A8-025 | 09455 |
| ATF4545DD8-025 | 15860 |
| C7505A8-025 | 15860 |
| NH7505A8-025 | 15860 |