NSN 3120-00-366-5167 · NIIN 003665167 · FSC 3120
NO DASHES 3120003665167
In Stock
BUSHING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABGD | SLOT LENGTH | FIRST INCHES NOMINAL 0.4810 |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| STYL | STYLE DESIGNATOR | |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.1550 AND INCHES MAXIMUM 0.1650 |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 58.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 440C |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER CHAMFERED |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.4760 AND INCHES MAXIMUM 0.4860 |
| AAUB | HOLE DIAMETER | FIRST INCHES NOMINAL 0.0700 |
| ABGC | SLOT WIDTH | FIRST INCHES NOMINAL 0.0937 |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 16.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 64.0 |
| CTJM | ANTIROTATION/LUBRICATION TYPE AND QUANTITY | HOLE 4 AND SLOT 2 |
| FEAT | SPECIAL FEATURES | LANGE END MACHINED TO ID 0.375 IN.MIN 0.385 IN.MAX BY 0.028 IN.MIN BY 0.029 IN.MAX DEEP |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.6850 AND INCHES MAXIMUM 0.7000 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.3400 AND INCHES MAXIMUM 0.3500 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.2507 AND INCHES MAXIMUM 0.2510 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12664 | 99643 |