NSN 3120-00-469-5220 · NIIN 004695220 · FSC 3120
NO DASHES 3120004695220
In Stock
BUSHING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 38.0 |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF BODY CADMIUM |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 8.5000 |
| SFTT | SURFACE TREATMENT | LEFT END SURFACE OF BODY AND FLANGE CADMIUM |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 7.7130 AND INCHES MAXIMUM 7.7150 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 7.5050 AND INCHES MAXIMUM 7.5080 |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER ROUND |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF BODY NICKEL |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF FLANGE NICKEL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1350 |
| FEAT | SPECIAL FEATURES | LEFT END SURFACE OF BODY ANF FLANGE COUNTERBORED 7.970 IN. NOM DIA,0.385 IN. NOM DEEP; THREE CIRCULAR LUBRICATION GROOVES AND FOUR HORIZONTAL LUBRICATION GROOVES |
| MATT | MATERIAL | OVERALL STEEL COMP 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| SFTT | SURFACE TREATMENT | INSIDE DIAMETER SURFACE OF BODY CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RIGHT END SURFACE OF BODY MFR REF SINGLE TREATMENT RESPONSE CT 8204,FSC- 13002 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.5110 |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF LEFT FLANGE NICKEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INSIDE DIAMETER SURFACE OF BODY MFR REF SINGLE TREATMENT RESPONSE CT 8204,FSC- 13002 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LEFT END SURFACE OF BODY AND FLANGE MFR REF SINGLE TREATMENT RESPONSE CT 8204,FSC- 13002 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTSIDE DIAMETER SURFACE OF BODY FED SPEC SINGLE TREATMENT RESPONSE QQ-N-290 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTSIDE DIAMETER SURFACE OF FLANGE FED SPEC SINGLE TREATMENT RESPONSE QQ-N-290 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RIGHT END SURFACE OF LEFT FLANGE FED SPEC SINGLE TREATMENT RESPONSE QQ-N-290 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6868 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 16.0 |
| CTMQ | SURFACE GROOVE LOCATION AND QUANTITY | EXTERNAL 7 |
| AGKH | LUBRICANT ACCOMMODATION STYLE |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1707-30 13002 | 6K4C8 |
| 1707-30 | 6K4C8 |
| 1707-30 | 6Z056 |
| 1707-30 13002 | 13002 |
| 1707-30 | 13002 |