NSN 3120-00-661-7525 · NIIN 006617525 · FSC 3120
NO DASHES 3120006617525
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 1.4900 AND INCHES MAXIMUM 1.5300 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 60.0 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MATT | MATERIAL | INNER MEMBER STEEL COMP E52100 |
| MATT | MATERIAL | RACE INSERT COPPER ALLOY 485 |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD SINGLE MATERIAL RESPONSE A-S 7440 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT FED SPEC SINGLE MATERIAL RESPONSE QQ-B-637 |
| FEAT | SPECIAL FEATURES | LUBRICATION GROOVE FORMED BY TWO PIECE RACE INSERT; 10 DEG 30 MIN SELF-ALIGNMENT EITHER DIRECTION; TIGHT INTERNAL FIT |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 8000 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6265 |
| STYL | STYLE DESIGNATOR | |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 2.6150 AND INCHES MAXIMUM 2.6550 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.5570 AND INCHES MAXIMUM 0.5820 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.7450 AND INCHES MAXIMUM 0.7550 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 1.6250 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6866 OR SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6868 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY FED STD SINGLE MATERIAL RESPONSE 66 |
| SFTT | SURFACE TREATMENT | INNER MEMBER CHROMIUM OR CADMIUM |
| AAJD | THREAD CLASS | 3A |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.3750 |