NSN 3120-00-662-4151 · NIIN 006624151 · FSC 3120
NO DASHES 3120006624151
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 40.0 |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER SQUARE |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 0.7500 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0600 |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 39.0 |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 100.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 100.0 |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.5009 AND INCHES MAXIMUM 0.5015 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.3700 AND INCHES MAXIMUM 0.3720 |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF LEFT FLANGE CADMIUM |
| STYL | STYLE DESIGNATOR | |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 100.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 100.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-C-390 |
| SFTT | SURFACE TREATMENT | INSIDE DIAMETER SURFACE OF BODY CADMIUM |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF BODY CADMIUM |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF FLANGE CADMIUM |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF BODY CADMIUM |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 100.0 |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.6600 AND INCHES MAXIMUM 0.7200 |
| MATT | MATERIAL | OVERALL COPPER ALLOY 955 |