NSN 3120-00-709-1960 · NIIN 007091960 · FSC 3120
NO DASHES 3120007091960
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.0930 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 48950 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 1.000 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 2.7810 |
| AAZF | SHANK STYLE | |
| MATT | MATERIAL | OUTER RACE MEMBER STEEL COMP 410 |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES NOMINAL 2.0000 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES NOMINAL 4.0930 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5980 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.7480 AND INCHES MAXIMUM 0.7500 |
| MATT | MATERIAL | RACE LINER PLASTIC AND GRAPHITE |
| MATT | MATERIAL | ROD END BODY STEEL COMP E4340 |
| SFTT | SURFACE TREATMENT | INNER MEMBER CHROMIUM |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6868 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 42.0 |
| FEAT | SPECIAL FEATURES | THD LG SLOTTED LONDITUDINALL 0.1560 IN. MIN 0.1610 IN. MAX W. BY 0.1000 IN. 0.1050 IN. MAX DEEP,THD END OF SHANK DRILLED LONGITUDINALLY 0.5000 IN. DIA BY 0.7495 IN. DEEP |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| AAJD | THREAD CLASS | 3A |
| CQFM | HARDNESS RATING | OUTER RACE MEMBER ROCKWELL C MINIMUM 24.0 AND ROCKWELL C MAXIMUM 35.0 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 128HM10387-1 | 21335 |
| 128HM10387-1 | 26512 |
| 128HM10387-1 | 50294 |
| 128HM10387-1 | 73134 |
| 128HM10387-1 | 79RG9 |
| 128HM10387-1 | 81376 |
| 128HM10387-1 | 97613 |
| 128HM10387-1 | 02758 |
| 128HM10387-1 | 09455 |