NSN 3120-00-781-4737 · NIIN 007814737 · FSC 3120
NO DASHES 3120007814737
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.8595 AND INCHES MAXIMUM 2.8895 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.3745 AND INCHES MAXIMUM 0.3750 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 1.1150 AND INCHES MAXIMUM 1.1350 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 2.3020 AND INCHES MAXIMUM 2.3220 |
| SFTT | SURFACE TREATMENT | INNER MEMBER CHROMIUM |
| FEAT | SPECIAL FEATURES | KEYWAY IN SHANK |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6866 |
| AAJD | THREAD CLASS | 3A |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.438 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.3440 AND INCHES MAXIMUM 1.4380 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MATT | MATERIAL | RACE LINER PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | ROD END BODY STEEL COMP 630 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.3700 AND INCHES MAXIMUM 0.3800 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 35.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 42.0 |
| AAZF | SHANK STYLE | |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 10140 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.4950 AND INCHES MAXIMUM 0.5000 |
| STYL | STYLE DESIGNATOR |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ARHT6E4 | 50294 |
| MSSJKR-6 | 73134 |
| MSSJKV-6 | 73134 |
| STSKG200T006 | 73134 |
| TFM106N | 77896 |
| DREMS6-080 | 81376 |
| DREMS6-085 | 81376 |
| STSKG200T006 | 81376 |
| STSKG200T006 | 97613 |
| KBNE6-200W | 97613 |
| STSKG200T006 | 98897 |
| 77284 | 09455 |
| STSKG200T006 | 09455 |
| ARHT6E4 | 15860 |
| STSKG200T006 | 16746 |
| 50E06-100W | 16746 |
Supersedes
This item replaces cancelled NIINs 004123454 · 008700158 · 008768796. An older drawing citing one of those numbers resolves here.