NSN 3120-00-834-1507 · NIIN 008341507 · FSC 3120
NO DASHES 3120008341507
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | RACE LINER PLASTIC TETRAFLUOROETHYLENE |
| MATT | MATERIAL | ROD END BODY STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER MFR REF SINGLE MATERIAL RESPONSE 114CS118-2,77272 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT MFR REF SINGLE MATERIAL RESPONSE 114CS118-2,77272 |
| MATT | MATERIAL | INNER MEMBER STEEL CORROSION RESISTING |
| MATT | MATERIAL | RACE INSERT STEEL CORROSION RESISTING |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C NOMINAL 56.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C NOMINAL 39.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 9000 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6868 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.6860 AND INCHES MAXIMUM 0.6880 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
| STYL | STYLE DESIGNATOR | |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 1.5200 AND INCHES MAXIMUM 1.5400 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.6650 AND INCHES MAXIMUM 1.6850 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE LINER MFR REF SINGLE MATERIAL RESPONSE 114CS118-2,77272 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.6250 AND INCHES MAXIMUM 3.6450 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.5550 AND INCHES MAXIMUM 0.5650 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 2.8650 AND INCHES MAXIMUM 2.8850 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 114CS118-2 | 77272 |
| 77272/114CS118-2 | 77272 |
| 177253 | 09455 |
| 114CS118-2 | 09455 |
| 114CS118-2 | 15860 |
| ATHE8-5D/FSPP | 15860 |