NSN 3120-00-900-6623 · NIIN 009006623 · FSC 3120
NO DASHES 3120009006623
In Stock
BUSHING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZLX | CORNER SHAPE | ALL CORNERS SQUARE |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 32.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.5600 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RIGHT END SURFACE OF BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RIGHT END SURFACE OF LEFT FLANGE FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| STYL | STYLE DESIGNATOR | |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF BODY CADMIUM |
| AAUB | HOLE DIAMETER | FIRST INCHES MINIMUM 0.0610 AND INCHES MAXIMUM 0.0640 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INSIDE DIAMETER SURFACE OF BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTSIDE DIAMETER SURFACE OF BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTSIDE DIAMETER SURFACE OF FLANGE FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 0.8800 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0600 |
| AGKH | LUBRICANT ACCOMMODATION STYLE | |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF FLANGE CADMIUM |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF BODY CADMIUM |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF LEFT FLANGE CADMIUM |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| CTJM | ANTIROTATION/LUBRICATION TYPE AND QUANTITY | HOLE 4 |
| CTMQ | SURFACE GROOVE LOCATION AND QUANTITY | EXTERNAL 1 |
| MATT | MATERIAL | OVERALL COPPER ALLOY 642 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-C-465 |
| SFTT | SURFACE TREATMENT | INSIDE DIAMETER SURFACE OF BODY CADMIUM |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.4950 AND INCHES MAXIMUM 0.4970 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.6263 AND INCHES MAXIMUM 0.6270 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |