NSN 3120-00-954-0019 · NIIN 009540019 · FSC 3120
NO DASHES 3120009540019
In Stock
BUSHING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| AGFT | RIGHT FLANGE WIDTH | INCHES NOMINAL 0.2500 |
| CSYM | SURFACE FINISH | INTERMEDIATE LAYER MICROINCHES 125.0 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 2.6210 AND INCHES MAXIMUM 2.6230 |
| AGFS | LEFT FLANGE WIDTH | INCHES NOMINAL 0.2500 |
| FEAT | SPECIAL FEATURES | DRILL ONE HOLE CENTER OD BODY 3/8 IN.BY 3/16 IN.DEEP USE FLAT BOTTOM DRILL |
| AGFR | RIGHT FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 2.8440 AND INCHES MAXIMUM 2.8600 |
| AGFQ | LEFT FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 2.8440 AND INCHES MAXIMUM 2.8600 |
| STYL | STYLE DESIGNATOR | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 30.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.1670 |
| BZLX | CORNER SHAPE | ALL CORNERS SQUARE |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 2.0460 AND INCHES MAXIMUM 2.0620 |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 15-0046000-33 | 52081 |
| BS-6 | 63857 |
| E15090 | 63857 |
| R1104PC33 | 63857 |