NSN 3120-01-015-1060 · NIIN 010151060 · FSC 3120
NO DASHES 3120010151060
In Stock
BUSHING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.9650 AND INCHES MAXIMUM 0.9800 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 1.5640 AND INCHES MAXIMUM 1.5650 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 1.3550 AND INCHES MAXIMUM 1.3600 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 2.0150 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0750 AND INCHES MAXIMUM 0.0800 |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER CHAMFERED |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER CHAMFERED |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER CHAMFERED |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL STD SINGLE TREATMENT RESPONSE -IL-STD 1500 CL 2 TY 2 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-6868 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 011666916. An older drawing citing one of those numbers resolves here.