NSN 3120-01-038-2310 · NIIN 010382310 · FSC 3120
NO DASHES 3120010382310
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.9500 AND INCHES MAXIMUM 1.9800 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.7960 AND INCHES MAXIMUM 0.8160 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 1.5520 AND INCHES MAXIMUM 1.5720 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.3320 AND INCHES MAXIMUM 0.3420 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.4320 AND INCHES MAXIMUM 0.4370 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.9370 AND INCHES MAXIMUM 0.9990 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 7960 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CBBL | FEATURES PROVIDED | FLUSH LUBRICATION FITTING |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 61.0 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 36.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 44.0 |
| CTLM | LUBRICATION FEATURE | INSIDE DIAMETER SURFACE OF RACE INSERT GROOVE |
| CTLM | LUBRICATION FEATURE | INTERNAL INNER MEMBER GROOVE |
| CTLM | LUBRICATION FEATURE | INNER MEMBER INDENTATION |
| CTLM | LUBRICATION FEATURE | OUTSIDE DIAMETER SURFACE OF RACE INSERT GROOVE |
| CTLM | LUBRICATION FEATURE | SPHERICAL SURFACE OF RACE INSERT GROOVE |
| CTLM | LUBRICATION FEATURE | RACE INSERT INDENTATION |
| FEAT | SPECIAL FEATURES | NAS 559 KEYWAY IN SHANK |
| MATT | MATERIAL | ROD END BODY STEEL COMP XM-12 |
| MATT | MATERIAL | RACE INSERT STEEL COMP XM-12 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MATT | MATERIAL | LUBRICATION GREASE AND DISULFIDE MOLYBDENUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LUBRICATION MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-21164 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | ROD END BODY PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
17 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACB10Y4 | 50294 |
| AR4E74FNW | 50294 |
| BACB10Y4 | 56644 |
| BACB10Y4 | 73134 |
| MSSK-4AS | 73134 |
| MSSK4ASFG | 73134 |
| BACB10Y4 | 81205 |
| BACB10Y4 | 81376 |
| BRES-4-2236-L2 | 81376 |
| BACB10Y4 | 97613 |
| KBE4-150AFNW | 97613 |
| HB4E212K | 02758 |
| BACB10Y4 | 02758 |
| 51588-041 | 09455 |
| BACB10Y4 | 09455 |
| BACB10Y4 | 15860 |
| ARB4E60FNW | 15860 |