NSN 3120-01-121-1778 · NIIN 011211778 · FSC 3120
NO DASHES 3120011211778
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.2890 AND INCHES MAXIMUM 0.3000 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.8765 AND INCHES MAXIMUM 0.8771 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.7520 AND INCHES MAXIMUM 0.7540 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 1.1250 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0600 |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | PLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE |
| MATT | MATERIAL | OUTER LAYER ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | INNER LAYER PLASTIC |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 76301-S21202 |
Cross-references
18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 74A410690-2001 | 1935A |
| 74A410690-2001 | 2U518 |
| 74A410690-2001 | 2M490 |
| 74A410690-2001 | 32168 |
| 74A410690-2001 | 35962 |
| 74A410690-2001 | 36164 |
| 74A410690-2001 | 50601 |
| 74A410690-2001 | 50632 |
| 74A410690-2001 | 58078 |
| 74A410690-2001 | 6Z056 |
| 74A410690-2001 | 6K4C8 |
| 74A410690-2001 | 76301 |
| 74A410690-2001 | 85941 |
| 74A410690-2001 | 9K006 |
| 10107767 | A486G |
| 74A410690-2001 | S5495 |
| 74A410690-2001 | 09455 |
| 74A410690-2001 | 13002 |