NSN 3120-01-181-1636 · NIIN 011811636 · FSC 3120
NO DASHES 3120011811636
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.0370 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.4370 AND INCHES MAXIMUM 0.4375 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES NOMINAL 1.2000 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES NOMINAL 2.4370 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.3380 AND INCHES MAXIMUM 0.3480 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.4350 AND INCHES MAXIMUM 0.4370 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.5000 AND INCHES MAXIMUM 1.5310 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 13200 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.562 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 37.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 42.0 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| FEAT | SPECIAL FEATURES | MS14101-7 BEARING PRESSED INTO ROD END |
| MATT | MATERIAL | RACE LINER PLASTIC TETRAFLUOROETHYLENE |
| MATT | MATERIAL | ROD END BODY STEEL COMP E4340 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | INNER MEMBER PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER MEMBER FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6868 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 128HM10224-5 | 1YJV1 |
| 128HM10224-5 | 26512 |
| 128HM10224-5 | 54623 |
| 128HM10224-5 | 65777 |
| 128HM10224-5 | 6Z056 |
| 128HM10224-5 | 79RG9 |
| 128HM10224-5 | 0BVP9 |