NSN 3120-01-187-8955 · NIIN 011878955 · FSC 3120
NO DASHES 3120011878955
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.4225 AND INCHES MAXIMUM 0.4375 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.5633 AND INCHES MAXIMUM 0.5643 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.4380 AND INCHES MAXIMUM 0.4390 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.9170 AND INCHES MAXIMUM 0.9370 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0575 AND INCHES MAXIMUM 0.0625 |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | PLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE |
| MATT | MATERIAL | INNER LAYER PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | OUTER LAYER ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 3,T8511 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T851 |
| SFTT | SURFACE TREATMENT | OUTER LAYER CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER LAYER MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M81934/2-07A012 | 81343 |
| AS81934 | 81343 |
| M81934/2-07A012 | 81349 |
| MIL-B-81934/2 | 81349 |
| AS81934 | 0U583 |
| M81934/2-07A012 | 0U583 |