NSN 3120-01-212-0183 · NIIN 012120183 · FSC 3120
NO DASHES 3120012120183
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.9130 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 5.0010 AND INCHES MAXIMUM 5.0030 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 4.7500 AND INCHES MAXIMUM 4.7530 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 5.1650 AND INCHES MAXIMUM 5.1700 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0800 AND INCHES MAXIMUM 0.0820 |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 11 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 9 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STYL | STYLE DESIGNATOR |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 74A410868-1001 | 1935A |
| 74A410868-1001 | 2U518 |
| 74A410868-1001 | 2M490 |
| 74A410868-1001 | 35962 |
| 74A410868-1001 | 32168 |
| 74A410868-1001 | 50601 |
| 74A410868-1001 | 5ZSC8 |
| 74A410868-1001 | 58078 |
| 74A410868-1001 | 6Z056 |
| 74A410868-2001 | 76301 |
| 74A410868-1001 | 76301 |
| 74A410868-1001 | 85941 |
| 74A410868-1001 | 9K006 |
| 10108240 | A486G |
| 74A410868-1001 | S5495 |
Supersedes
This item replaces cancelled NIINs 012165621 · 012595681. An older drawing citing one of those numbers resolves here.