NSN 3120-01-234-1476 · NIIN 012341476 · FSC 3120
NO DASHES 3120012341476
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.5750 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.4370 AND INCHES MAXIMUM 0.4375 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 1.1400 AND INCHES MAXIMUM 1.1600 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 1.9900 AND INCHES MAXIMUM 2.0100 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.4470 AND INCHES MAXIMUM 0.4570 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.5600 AND INCHES MAXIMUM 0.5620 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 1.1250 |
| AGHA | INSPECTION HOLE CENTER TO END DISTANCE | INCHES MINIMUM 0.4800 AND INCHES MAXIMUM 0.5200 |
| AGHB | SHANK WIDTH ACROSS WRENCH FLATS | INCHES MINIMUM 0.6150 AND INCHES MAXIMUM 0.6270 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 12000 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.437 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 37.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 42.0 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C OR STEEL COMP XM-13 |
| MATT | MATERIAL | ROD END BODY STEEL COMP E4340 |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MATT | MATERIAL | RACE LINER PLASTIC POLYTETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD 1ST MATERIAL RESPONSE A-S 5630 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5629 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE MATERIAL RESPONSE QQ-C-00465 |
| SFTT | SURFACE TREATMENT | INNER MEMBER PASSIVATE |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER MEMBER FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 299-4573-005C | 19710 |
| REF14W14M | 21335 |
| REF14W14M | 3NPS1 |
| AS81935/2 | 81343 |
| M81935/2-07 | 81343 |
| AS81935 | 81343 |
| MIL-B-81935/2 | 81349 |
| M81935/2-07 | 81349 |
| AS81935/2-07 | 81349 |
| M81935/2-7 | 81349 |