NSN 3120-01-293-0059 · NIIN 012930059 · FSC 3120
NO DASHES 3120012930059
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.5625 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.5007 AND INCHES MAXIMUM 0.5017 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.3755 AND INCHES MAXIMUM 0.3765 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.8550 AND INCHES MAXIMUM 0.8750 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0575 AND INCHES MAXIMUM 0.0625 |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| MATT | MATERIAL | OUTER LAYER ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | INNER LAYER PLASTIC POLYTETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 3 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225-6 |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF LEFT FLANGE ANODIZE AND CHROMATE |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF BODY ANODIZE AND CHROMATE |
| SFTT | SURFACE TREATMENT | RIGHT END SURFACE OF BODY ANODIZE AND CHROMATE |
| SFTT | SURFACE TREATMENT | OUTSIDE DIAMETER SURFACE OF FLANGE ANODIZE AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RIGHT END SURFACE OF BODY MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625,TY 1 OR 2 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTSIDE DIAMETER SURFACE OF BODY MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625,TY 1 OR 2 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RIGHT END SURFACE OF LEFT FLANGE MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625,TY 1 OR 2 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTSIDE DIAMETER SURFACE OF FLANGE MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625,TY 1 OR 2 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS81934 | 81343 |
| AS81934/2 | 81343 |
| M81934/2-06A016 | 81343 |
| M81934/2-06A016 | 81349 |
| AS81934/2 | 0U583 |
| M81934/2-06A016 | 0U583 |
| AS81934 | 0U583 |
Supersedes
This item replaces cancelled NIIN 012159044. An older drawing citing one of those numbers resolves here.