NSN 3120-01-325-9897 · NIIN 013259897 · FSC 3120
NO DASHES 3120013259897
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4400 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.3120 AND INCHES MAXIMUM 0.3125 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.9740 AND INCHES MAXIMUM 0.9940 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 1.9380 AND INCHES MAXIMUM 1.9580 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.2860 AND INCHES MAXIMUM 0.2960 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.3730 AND INCHES MAXIMUM 0.3750 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.1560 AND INCHES MAXIMUM 1.2180 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 8600 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 42.0 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 37.0 |
| FEAT | SPECIAL FEATURES | KEYWAY IN SHANK; SURFACE FINISH ON BALL PASSIVATE PER MIL-S-5002 OPTIONAL |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MATT | MATERIAL | RACE LINER PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MATT | MATERIAL | ROD END BODY STEEL COMP E4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT MIL SPEC SINGLE MATERIAL RESPONSE A-S 5643 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TYE 2,CLASS 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-B-81935 TO 4 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS81935 | 81343 |
| M81935/4-05K | 81343 |
| M81935/4-05K | 81349 |
| MIL-B-81935/4 | 81349 |
| KBDE-5-101W | 97613 |
| SAE-AS81935/4 | 0U583 |
| M81935/4-05K | 0U583 |
| AS81935 | 0U583 |