NSN 3120-01-326-4725 · NIIN 013264725 · FSC 3120
NO DASHES 3120013264725
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.3600 AND INCHES MAXIMUM 0.3750 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.9388 AND INCHES MAXIMUM 0.9398 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.7505 AND INCHES MAXIMUM 0.7515 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 1.4800 AND INCHES MAXIMUM 1.5000 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0575 AND INCHES MAXIMUM 0.0625 |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | PLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE |
| MATT | MATERIAL | INNER LAYER PLASTIC POLYURETHANE |
| MATT | MATERIAL | OUTER LAYER ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER FED SPEC 1ST MATERIAL RESPONSE QQ-A-200 TO 3,T8511 OR FED SPEC 2ND MATERIAL RESPONSE QQ-A-225 TO 6,T851 |
| SFTT | SURFACE TREATMENT | OUTER LAYER CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER LAYER MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M81934/2-12A010 | 81343 |
| AS81934/2 | 81343 |
| M81934/2-12A010 | 81349 |
| MIL-B-81934/2 | 81349 |
| AS81934/2 | 0U583 |
| M81934/2-12A010 | 0U583 |
Supersedes
This item replaces cancelled NIIN 001941656. An older drawing citing one of those numbers resolves here.