NSN 3120-01-333-6515 · NIIN 013336515 · FSC 3120
NO DASHES 3120013336515
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.8287 AND INCHES MAXIMUM 0.8437 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 1.8768 AND INCHES MAXIMUM 1.8778 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 1.6255 AND INCHES MAXIMUM 1.6265 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 2.3550 AND INCHES MAXIMUM 2.3750 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0887 AND INCHES MAXIMUM 0.0937 |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| MATT | MATERIAL | INNER LAYER PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | OUTER LAYER ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 3 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225-6 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE OR CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625,TYE 1 TO 2 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS81934/2 | 81343 |
| M81934/2-26A024 | 81343 |
| M81934/2-26A024 | 81349 |
| MIL-B-81934/2 | 81349 |
| M81934/2-26A024 | 0U583 |
| AS81934/2 | 0U583 |