NSN 3120-01-343-2389 · NIIN 013432389 · FSC 3120
NO DASHES 3120013432389
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4380 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.9900 AND INCHES MAXIMUM 1.0100 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 1.9070 AND INCHES MAXIMUM 1.9690 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.2600 AND INCHES MAXIMUM 0.2720 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.5880 AND INCHES MAXIMUM 0.5930 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.2190 AND INCHES MAXIMUM 1.3120 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 2270 |
| AWDP | THREAD DIAMETER | INCHES MINIMUM 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 42.0 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 37.0 |
| CTLM | LUBRICATION FEATURE | RACE LINER SELF-LUBRICATING LINER |
| FEAT | SPECIAL FEATURES | FINISH ON BALL OPTIONAL |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4130 OR STEEL COMP E4340 |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MATT | MATERIAL | RACE LINER PLASTIC POLYTETRAFLUOROETHYLENE AND PLASTIC POLYAMIDE NYLON AND PLASTIC PHENOLIC |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE LINER MIL SPEC SINGLE MATERIAL RESPONSE -IL-B-81820 |
| SFTT | SURFACE TREATMENT | INNER MEMBER PASSIVATE |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER MEMBER FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 04A070-04 | 1W025 |
| ARYT4EHJ | 50294 |
| 04A070-04 | 76823 |
| KBDE4-400 | 97613 |
| 01-827-04E-004 | 09455 |