NSN 3120-01-346-5607 · NIIN 013465607 · FSC 3120
NO DASHES 3120013465607
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.5125 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 2.7650 AND INCHES MAXIMUM 2.7850 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 4.1150 AND INCHES MAXIMUM 4.1350 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 1.0100 AND INCHES MAXIMUM 1.0200 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 1.3700 AND INCHES MAXIMUM 1.3800 |
| AGGY | SHANK THREAD LENGTH | INCHES MAXIMUM 2.1250 |
| AGHA | INSPECTION HOLE CENTER TO END DISTANCE | INCHES MINIMUM 1.2920 AND INCHES MAXIMUM 1.3320 |
| AGHB | SHANK WIDTH ACROSS WRENCH FLATS | INCHES MINIMUM 1.7400 AND INCHES MAXIMUM 1.7520 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 80300 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 1.2500 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 37.0 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 42.0 |
| CTLM | LUBRICATION FEATURE | RACE LINER SELF-LUBRICATING LINER |
| MATT | MATERIAL | RACE LINER PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS81935/2 | 81343 |
| AS81935 | 81343 |
| M81935/2-16L | 81343 |
| M81935/2-16L | 81349 |
| MIL-B-81935/2 | 81349 |
| SAE-AS81935/2 | 0U583 |
| AS81935/2 | 0U583 |
| AS81935 | 0U583 |
| M81935/2-16L | 0U583 |