NSN 3120-01-347-7303 · NIIN 013477303 · FSC 3120
NO DASHES 3120013477303
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.7000 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.4370 AND INCHES MAXIMUM 0.4375 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 1.1400 AND INCHES MAXIMUM 1.1600 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 2.1150 AND INCHES MAXIMUM 2.1350 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.4470 AND INCHES MAXIMUM 0.4570 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.5600 AND INCHES MAXIMUM 0.5620 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.2500 AND INCHES MAXIMUM 1.3120 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.4370 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 42.0 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 37.0 |
| MATT | MATERIAL | ROD END BODY STEEL COMP 4340 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MATT | MATERIAL | RACE LINER PLASTIC POLYTETRAFLUOROETHYLENE |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |