NSN 3120-01-349-4107 · NIIN 013494107 · FSC 3120
NO DASHES 3120013494107
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.3875 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 1.5150 AND INCHES MAXIMUM 1.5350 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 2.6150 AND INCHES MAXIMUM 2.6350 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.5720 AND INCHES MAXIMUM 0.5820 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.7480 AND INCHES MAXIMUM 0.7500 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 1.5310 AND INCHES MAXIMUM 1.5930 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 21900 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.6250 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 42.0 |
| FEAT | SPECIAL FEATURES | KEYWAY IN SHANK |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MATT | MATERIAL | ROD END BODY STEEL COMP E4340 |
| MATT | MATERIAL | RACE LINER PLASTIC POLYTETRAFLUOROETHYLENE AND PLASTIC POLYAMIDE NYLON AND PLASTIC PHENOLIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE LINER MIL SPEC ALL MATERIAL RESPONSES -IL-B-81820 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 04A077-10KL | 1W025 |
| ANML10W | 50294 |
| 04A077-10KL | 76823 |
| SWRKMLHS-10-500 | 81376 |
| KBDEL10-351W | 97613 |
| ANML10W(LI) | J1011 |
| ANML10W(LI) | S0352 |
| 110824-010 | 09455 |
| ANML10W | 15860 |
| ANML10W(L1) | 15860 |